Produce spunbond fabrics of high quality – even with low basis weights and at high production speeds. With REICOFIL® technology we provide the most energy efficient and stable process on the market.
REICOFIL is the only nonwoven technology on the market to utilize a closed spinning process. The filaments only come into contact with the surrounding air just before discharge. The result: The most stable nonwoven process on the market and a high product quality that easily meets the demands of the hygiene industry.
Weld seams can lead to flaws in the nonwoven fabric. For this reason, we always distribute the melt across a single piece die - even at line widths of 5.2 meters. Your benefits: Even melt distribution, only one spin pump, and only one spinneret.
Modern automation ensures great reliability and safety in the production process and simple handling of the line. At the touch of a button you can call up the parameters, or start up and shut down the line.
With an energy requirement of 1-1.2 kilowatt h/kg of nonwoven produced, REICOFIL technology transforms granulate to nonwoven with more energy efficiency than any other technology on the market. Our goal: Better performance and greater energy efficiency with every line generation.
Since the introduction of REICOFIL 4 technology, it has been possible to reliably produce especially light nonwovens: Nowadays, high-quality uniform basis weights of 10 grams per square meter are standard with the REICOFIL process.
Line configuration, raw material, speed, throughput: During production, you can adjust the process parameters to directly influence the nonwoven properties without interfering with the process. We also provide different downstream components for subsequent treatment.
Single beam spundbond line
For production speeds of up to 300 m/min
Double beam spunbond line
For production speeds of up to 500 m/min
Three-beam spunbond line
For production speeds of up to 650 m/min
* Depends on the fixing process
** By using additives or batches